OpenAI Watch

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is primarily designed for creating diagrams and simple graphics. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have a LaTeX environment set up with the TikZ package installed. Here's a basic example of a unicorn drawing using TikZ:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (2,1) ellipse (1.5 and 0.5);
  
  % Head of the unicorn
  \draw [fill=gray!30] (3.5,1.5) circle (0.5);
  
  % Legs of the unicorn
  \draw [fill=gray!30] (1.5,1) -- (1.5,0) (2,1) -- (2,0) (2.5,1) -- (2.5,0) (3,1) -- (3,0);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (0.5,1) .. controls (0,1.5) and (0,0.5) .. (0.5,1);
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (3.75,2) -- (4,2.5) -- (3.5,2) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (3.7,1.6) circle (0.05);
  
  % Mane of the unicorn
  \draw [fill=pink] (3.5,1.5) .. controls (3.2,2) and (3.8,2) .. (3.5,1.5);
  \draw [fill=pink] (3.5,1.5) .. controls (3.3,1.8) and (3.7,1.8) .. (3.5,1.5);
  \draw [fill=pink] (3.5,1.5) .. controls (3.4,1.6) and (3.6,1.6) .. (3.5,1.5);
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The unicorn consists of an oval body, a circular head, simple legs, a tail, a horn, an eye, and a mane. The colors and shapes are basic, and the drawing is not to scale or detailed.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Remember, this is a very basic representation. Creating a more detailed and realistic unicorn would require more advanced TikZ skills and a lot of patience, as you would need to define paths and shapes that more accurately represent the features of a unicorn.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is better suited for diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your system with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!30] (2,1) arc (0:180:0.5 and 0.25) -- (1,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!30] (0.3,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (1,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (-0.3,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (-1,-1) rectangle +(0.3,-0.7);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (-2,-0.5) -- (-2.5,-0.7) -- (-2,-0.9) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.75,1.25) circle (0.05);
  
  % Horn of the unicorn
  \draw [fill=yellow!80] (1.5,1.5) -- (1.75,2.5) -- (1.25,1.5) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1) .. controls (1.7,1.2) and (2,1.5) .. (1.8,1.7)
        .. controls (1.6,1.9) and (1.3,1.7) .. (1.5,1.5)
        .. controls (1.7,1.3) and (1.9,1.1) .. (1.7,1.3)
        .. controls (1.5,1.5) and (1.2,1.3) .. (1.4,1.1)
        .. controls (1.6,0.9) and (1.8,0.7) .. (1.6,0.9)
        .. controls (1.4,1.1) and (1.1,0.9) .. (1.3,0.7)
        .. controls (1.5,0.5) and (1.7,0.3) .. (1.5,0.5)
        .. controls (1.3,0.7) and (1,0.5) .. (1.2,0.3)
        -- (1.5,1) -- cycle;
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. It uses ellipses for the body and head, rectangles for the legs, and simple paths for the tail, mane, and horn. The eye is a small filled circle, and the horn is a filled triangle with a yellow color.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Remember, this is a very simple and abstract representation. Creating a more detailed and realistic unicorn would require a lot more TikZ commands and a deeper understanding of how to manipulate paths and shapes in TikZ.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To use the following code, you'll need to have LaTeX installed on your system with the TikZ package. You can include this code in your LaTeX document:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!20] (1.5,1) arc (0:180:0.5 and 0.25) -- (0.5,1) to[out=260,in=100] (1,-0.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!20] (0.3,-1) rectangle +(0.2,-0.7);
  \draw [fill=gray!20] (-0.3,-1) rectangle +(-0.2,-0.7);
  \draw [fill=gray!20] (1.3,-1) rectangle +(0.2,-0.7);
  \draw [fill=gray!20] (0.7,-1) rectangle +(-0.2,-0.7);
  
  % Tail of the unicorn
  \draw [fill=gray!40] (-1.8,-0.5) to[out=270,in=180] (-1.5,-1) to[out=0,in=270] (-1.2,-0.5) to[out=90,in=0] (-1.5,0) to[out=180,in=90] cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.2,0.8) circle (0.05);
  
  % Horn of the unicorn
  \draw [fill=yellow!80!orange] (1.5,1.5) -- (1.7,2.2) -- (1.3,2.2) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=purple!60!pink] (1.2,1.2) to[out=80,in=260] (1.3,1.8) to[out=80,in=260] (1.1,2.4) to[out=260,in=80] (1,1.8) to[out=260,in=80] (1.1,1.2) -- cycle;
  \draw [fill=purple!60!pink] (0.8,1.2) to[out=80,in=260] (0.9,1.8) to[out=80,in=260] (0.7,2.4) to[out=260,in=80] (0.6,1.8) to[out=260,in=80] (0.7,1.2) -- cycle;
  \draw [fill=purple!60!pink] (0.4,1.2) to[out=80,in=260] (0.5,1.8) to[out=80,in=260] (0.3,2.4) to[out=260,in=80] (0.2,1.8) to[out=260,in=80] (0.3,1.2) -- cycle;
\end{tikzpicture}
\end{document}
```

This code will produce a simple, cartoonish unicorn with a body, head, legs, tail, eye, horn, and mane. The colors and shapes are basic, and you can adjust them to your liking. To create a more detailed and realistic unicorn, you would need to use more complex paths and possibly incorporate additional TikZ libraries or even draw the unicorn in a vector graphics editor and import it into your LaTeX document.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is typically used for creating diagrams, graphs, and simple shapes rather than detailed illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your computer with the TikZ package. You can then use the following code in your LaTeX document:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
    % Body of the unicorn
    \draw [fill=gray!30] (2,1) ellipse (1.5 and 1);
    
    % Head of the unicorn
    \draw [fill=gray!30] (3.5,2) .. controls (4,2.5) and (4.5,2.5) .. (5,2)
        .. controls (4.5,1.5) and (4,1.5) .. cycle;
    
    % Legs of the unicorn
    \draw [fill=gray!30] (1.5,1) -- (1.5,0) -- (2,0) -- (2,1);
    \draw [fill=gray!30] (2.5,1) -- (2.5,0) -- (3,0) -- (3,1);
    
    % Tail of the unicorn
    \draw [fill=gray!30] (0.5,1.5) .. controls (0,1) and (0,0.5) .. (0.5,0.5)
        .. controls (1,0.5) and (1,1) .. cycle;
    
    % Horn of the unicorn
    \draw [fill=yellow!50] (4.5,3) -- (4.75,2.5) -- (4.25,2.5) -- cycle;
    
    % Eye of the unicorn
    \draw [fill=black] (4.2,2.2) circle (0.05);
    
    % Mane of the unicorn
    \draw [fill=purple!50] (3.5,2.5) .. controls (3,3) and (2.5,3) .. (2,2.5)
        .. controls (2.5,2.5) and (3,2.5) .. cycle;
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The unicorn consists of an elliptical body, a stylized head, simple legs, a tail, a horn, an eye, and a mane. The colors and shapes are basic, and you can adjust them to create a more detailed or different style of unicorn if you wish.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To draw a unicorn in TikZ, you'll need to have LaTeX installed on your system with the TikZ package. Here's a basic example of how you might draw a simple unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!30] (2,1) arc (0:180:0.5 and 0.25) -- (1,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!30] (0.5,-1) rectangle (0.7,-2);
  \draw [fill=gray!30] (-0.5,-1) rectangle (-0.7,-2);
  \draw [fill=gray!30] (1.3,-1) rectangle (1.5,-2);
  \draw [fill=gray!30] (-1.3,-1) rectangle (-1.5,-2);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (-2,-0.5) -- (-3,-0.5) -- (-2.5,0) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.75,1.25) circle [radius=0.05];
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (1.5,1.75) -- (1.75,2.5) -- (1.25,2.5) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1.5) .. controls (1.25,1.75) and (1,1.5) .. (0.75,1.75)
        .. controls (0.5,1.5) and (0.25,1.75) .. (0,1.5)
        .. controls (-0.25,1.75) and (-0.5,1.5) .. (-0.75,1.75)
        .. controls (-1,1.5) and (-1.25,1.75) .. (-1.5,1.5)
        -- (1.5,1.5);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. You can compile this LaTeX code using a LaTeX editor or an online LaTeX editor like Overleaf. The resulting image will be a simple, cartoonish unicorn with a body, head, legs, tail, eye, horn, and mane.

For a more detailed and realistic unicorn, you would need to use more advanced TikZ techniques, possibly including custom paths, shading, and more complex shapes. Creating such an image would be quite time-consuming and would require a good understanding of both TikZ and drawing techniques.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is primarily designed for creating diagrams and simple graphics. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To use the following code, you'll need to have LaTeX installed on your system with the TikZ package. You can include this code in your LaTeX document to create a simple representation of a unicorn.

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!20] (1.5,1) arc (0:180:0.5 and 0.25) -- (0.5,1) -- (1,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!20] (0.3,-1) rectangle +(0.2,1);
  \draw [fill=gray!20] (1.3,-1) rectangle +(0.2,1);
  \draw [fill=gray!20] (-0.7,-1) rectangle +(0.2,1);
  \draw [fill=gray!20] (-1.7,-1) rectangle +(0.2,1);
  
  % Tail of the unicorn
  \draw [fill=gray!40] (-2,0) -- (-2.5,-0.2) -- (-2,-0.4) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.3,1.2) circle (0.05);
  
  % Horn of the unicorn
  \draw [fill=yellow!80] (1,1.5) -- (1.2,2) -- (0.8,2) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (0.5,1) .. controls (0.2,1.2) and (-0.2,1.4) .. (-0.5,1.5) -- (-0.5,1) -- cycle;
  \draw [fill=pink] (-0.5,1) .. controls (-0.8,1.2) and (-1.2,1.4) .. (-1.5,1.5) -- (-1.5,1) -- cycle;
  \draw [fill=pink] (-1.5,1) .. controls (-1.8,1.2) and (-2.2,1.4) .. (-2.5,1.5) -- (-2.5,1) -- cycle;
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. It uses basic shapes like ellipses, rectangles, and paths to create the body, head, legs, tail, eye, horn, and mane of the unicorn. The colors and shapes are quite basic, but you can modify and expand upon this example to create a more detailed and personalized unicorn image.

To compile this code, you can use a LaTeX editor or an online LaTeX editor like Overleaf. Just copy and paste the code into a new LaTeX document, and compile it to see the resulting image.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is better suited for diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your computer with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (2,1) ellipse (1.5 and 0.5);
  
  % Head of the unicorn
  \draw [fill=gray!30] (3.5,1.5) circle (0.5);
  
  % Legs of the unicorn
  \draw [fill=gray!30] (1.5,0.5) rectangle (1.7,1);
  \draw [fill=gray!30] (2.3,0.5) rectangle (2.5,1);
  \draw [fill=gray!30] (2.5,0.5) rectangle (2.7,1);
  \draw [fill=gray!30] (3.3,0.5) rectangle (3.5,1);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (1,1) .. controls (0.5,1.5) and (0.5,0.5) .. (1,1);
  
  % Mane of the unicorn
  \draw [fill=gray!30] (3.5,2) .. controls (3.2,2.5) and (3.8,2.5) .. (3.5,2);
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (3.5,2) -- (3.7,2.5) -- (3.3,2.5) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (3.7,1.6) circle (0.05);
  
  % Smile of the unicorn (optional)
  \draw (3.5,1.4) arc (30:-30:0.2);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. It uses ellipses for the body and head, rectangles for the legs, and simple paths for the tail, mane, and horn. The eye is a small filled circle, and there's an optional smile arc.

To create a more detailed and realistic unicorn, you would need to use more complex paths and possibly incorporate techniques like shading, which would significantly increase the complexity of the TikZ code. For intricate illustrations, vector graphic software like Adobe Illustrator or Inkscape might be more appropriate, and the resulting image could then be included in your LaTeX document.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To draw a unicorn in TikZ, you'll need to have LaTeX installed on your computer with the TikZ package. Here's a basic example of how you might draw a simple unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (2,1) ellipse (1.5 and 0.5);
  
  % Head of the unicorn
  \draw [fill=gray!20] (3.5,1.5) circle (0.5);
  
  % Legs of the unicorn
  \draw [fill=gray!20] (1.5,1) -- (1.5,0) -- (1.7,0) -- (1.7,1);
  \draw [fill=gray!20] (2.5,1) -- (2.5,0) -- (2.7,0) -- (2.7,1);
  
  % Tail of the unicorn
  \draw [fill=gray!20] (0.5,1) .. controls (0,1.5) and (0,0.5) .. (0.5,1);
  
  % Mane of the unicorn
  \draw [fill=gray!20] (3.5,2) .. controls (3,2.5) and (4,2.5) .. (3.5,2);
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (3.5,2) -- (3.8,2.5) -- (3.2,2.5) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (3.7,1.6) circle (0.05);
  
  % Smile of the unicorn (optional)
  \draw (3.3,1.3) arc (225:315:0.2);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. The body, head, legs, tail, mane, horn, and eye are all created using simple shapes like ellipses, circles, and lines. The horn is colored yellow to distinguish it from the rest of the body.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MikTeX on your computer and compile it using a tool like pdflatex.

Remember, this is a very simple and abstract representation. Creating a detailed and realistic unicorn would require much more complex TikZ code and a good understanding of how to create custom shapes and paths in TikZ.

Creating a detailed drawing of a unicorn using TikZ within LaTeX can be quite complex, as TikZ is better suited for diagrams and simpler illustrations. However, I can provide you with a basic example of how to draw a stylized unicorn using TikZ. You can then expand upon this example to create a more detailed image if you wish.

Here's a simple LaTeX document that uses TikZ to draw a stylized unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (2,1) ellipse (1.5 and 1);
  
  % Head of the unicorn
  \draw [fill=gray!30] (3.5,2) circle (0.5);
  
  % Ear of the unicorn
  \draw [fill=gray!30] (3.7,2.5) -- (3.9,2.7) -- (3.7,2.7) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (3.3,2.1) circle (0.05);
  
  % Mane of the unicorn
  \draw [thick, red] (3.5,2.5) to [out=120,in=60] (2.5,2.5);
  \draw [thick, orange] (3.5,2.4) to [out=120,in=60] (2.5,2.4);
  \draw [thick, yellow] (3.5,2.3) to [out=120,in=60] (2.5,2.3);
  \draw [thick, green] (3.5,2.2) to [out=120,in=60] (2.5,2.2);
  \draw [thick, blue] (3.5,2.1) to [out=120,in=60] (2.5,2.1);
  \draw [thick, violet] (3.5,2.0) to [out=120,in=60] (2.5,2.0);
  
  % Tail of the unicorn
  \draw [thick, red] (0.5,1.5) to [out=-120,in=240] (1,1);
  \draw [thick, orange] (0.5,1.4) to [out=-120,in=240] (1,0.9);
  \draw [thick, yellow] (0.5,1.3) to [out=-120,in=240] (1,0.8);
  \draw [thick, green] (0.5,1.2) to [out=-120,in=240] (1,0.7);
  \draw [thick, blue] (0.5,1.1) to [out=-120,in=240] (1,0.6);
  \draw [thick, violet] (0.5,1.0) to [out=-120,in=240] (1,0.5);
  
  % Legs of the unicorn
  \draw (1.5,1) -- (1.5,0);
  \draw (2.5,1) -- (2.5,0);
  
  % Horn of the unicorn
  \draw [fill=gold] (3.5,2.5) -- (3.8,3) -- (3.5,2.6) -- cycle;
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn with a colorful mane and tail, a horn, and a basic body shape. You can compile this LaTeX document using a LaTeX editor or an online LaTeX editor like Overleaf.

To create a more detailed and realistic unicorn, you would need to use more complex paths, shapes, and possibly incorporate techniques like shading. TikZ is capable of producing quite intricate drawings, but it requires a lot of time and patience to define the paths and shapes accurately.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To use the following code, you'll need to have LaTeX installed on your system with the TikZ package. You can include this code in your LaTeX document:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!20] (1.5,1) .. controls (2.5,1.5) and (3,2) .. (3.5,3)
        .. controls (3.6,2) and (3.2,1) .. (2.5,1)
        -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!20] (0.3,-1) rectangle (0.7,-2);
  \draw [fill=gray!20] (-0.3,-1) rectangle (-0.7,-2);
  \draw [fill=gray!20] (1.3,-1) rectangle (1.7,-2);
  \draw [fill=gray!20] (0.7,-1) rectangle (1.1,-2);
  
  % Tail of the unicorn
  \draw [fill=gray!20] (-1.5,-0.5) .. controls (-2,-1) and (-2.5,-1) .. (-3,-1.5)
        .. controls (-2.5,-1) and (-2,-0.5) .. cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (2.7,2) circle [radius=0.1cm];
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (3.5,3) -- (4,4) -- (3.7,3.2) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=purple!50] (1.5,1.5) ellipse [x radius=0.5cm, y radius=0.2cm];
  \draw [fill=purple!50] (1.8,1.8) ellipse [x radius=0.5cm, y radius=0.2cm];
  \draw [fill=purple!50] (2.1,2.1) ellipse [x radius=0.5cm, y radius=0.2cm];
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The body, head, legs, tail, eye, horn, and mane are all created with basic shapes and some control points for curves. You can adjust the colors, shapes, and sizes to better fit your vision of a unicorn.

To get a more detailed and realistic unicorn, you would need to use more advanced TikZ techniques, possibly tracing an actual image of a unicorn, which would be a much more involved process.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is primarily designed for creating diagrams and simple graphics. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your system with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}[scale=0.5]
    % Body of the unicorn
    \draw [fill=gray!30] (2,1) ellipse (3 and 2);
    
    % Head of the unicorn
    \draw [fill=gray!30] (5,3) ellipse (1.5 and 1);
    
    % Legs of the unicorn
    \draw [fill=gray!30] (0.5,1) rectangle (1.5,0);
    \draw [fill=gray!30] (2.5,1) rectangle (3.5,0);
    \draw [fill=gray!30] (1,1) rectangle (2,0);
    \draw [fill=gray!30] (3,1) rectangle (4,0);
    
    % Tail of the unicorn
    \draw [fill=gray!30] (0,1.5) -- (-1,2) -- (-1,1) -- cycle;
    
    % Mane of the unicorn
    \draw [fill=gray!30] (5,4) to[out=90,in=0] (4,5) to[out=180,in=90] (3,4);
    
    % Horn of the unicorn
    \draw [fill=yellow!50] (5.5,4) -- (6.5,6) -- (5.5,6) -- cycle;
    
    % Eye of the unicorn
    \draw [fill=black] (5.5,3.5) circle (0.1);
    
    % Smile of the unicorn (optional)
    \draw (5,3) to[out=270,in=180] (5.5,2.5) to[out=0,in=270] (6,3);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. The body, head, legs, tail, mane, horn, and eye are all created using simple shapes like ellipses, rectangles, and paths. You can adjust the colors, shapes, and sizes to your liking.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can compile it locally using a LaTeX distribution like TeX Live or MiKTeX. If you're compiling locally, save the code in a `.tex` file and compile it with `pdflatex` or a similar LaTeX compiler to produce a PDF with your TikZ unicorn drawing.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To draw a unicorn in TikZ, you'll need to have LaTeX installed on your system with the TikZ package. Here's a basic example of how you might draw a simple unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (2,1) ellipse (1.5 and 0.5);
  
  % Head of the unicorn
  \draw [fill=gray!20] (3.5,1.5) circle (0.5);
  
  % Legs of the unicorn
  \draw [fill=gray!20] (1.5,1) -- (1.5,0) (2,1) -- (2,0) (2.5,1) -- (2.5,0) (3,1) -- (3,0);
  
  % Tail of the unicorn
  \draw [fill=gray!20] (0.5,1) .. controls (0,1.5) and (0,0.5) .. (0.5,1);
  
  % Mane of the unicorn
  \draw [fill=gray!20] (3.5,2) .. controls (3.7,2.5) and (3.3,2.5) .. (3.5,2);
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (3.5,2) -- (3.8,2.5) -- (3.2,2.5) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (3.7,1.6) circle (0.05);
  
  % Smile of the unicorn (optional)
  \draw (3.5,1.3) arc (0:-180:0.2 and 0.1);
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The body, head, legs, tail, mane, horn, and eye are all created using basic shapes like ellipses, circles, and lines. The horn is colored yellow to distinguish it from the rest of the body.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MikTeX on your computer and compile it using a tool like pdflatex.

Remember, this is a very basic representation. Creating a more detailed and realistic unicorn would require a lot more TikZ commands and a deeper understanding of how to manipulate paths and shapes in TikZ.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is better suited for diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your computer with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!20] (1.5,1) arc (0:180:0.5 and 0.25) -- (0.5,1) -- (1,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!20] (-1,-1) rectangle (-0.5,-2);
  \draw [fill=gray!20] (0,-1) rectangle (0.5,-2);
  \draw [fill=gray!20] (1,-1) rectangle (1.5,-2);
  \draw [fill=gray!20] (2,-1) rectangle (2.5,-2);
  
  % Tail of the unicorn
  \draw [fill=gray!20] (-1.5,-0.5) -- (-2,-1) -- (-1.5,-1.5) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.7,1.2) circle [radius=0.05];
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (1.25,1.75) -- (1.5,2.5) -- (1,2.5) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1) .. controls (1.7,1.2) and (2,1.5) .. (1.8,1.7) .. controls (1.6,1.9) and (1.3,1.7) .. (1.5,1.9) .. controls (1.7,2.1) and (2,2.3) .. (1.8,2.5) .. controls (1.6,2.7) and (1.3,2.5) .. (1.5,2.7) -- (1,2.7) -- (1,1);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. The unicorn consists of an elliptical body, a simple head, straight legs, a triangular tail, a circular eye, a triangular horn, and a wavy mane. The colors and shapes are quite basic, and you can adjust them to make the unicorn look more like how you envision it.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details and shapes involved. However, I can provide you with a simple example of how to draw a stylized unicorn using TikZ in LaTeX. This will not be a detailed or realistic drawing, but rather a basic representation.

To use the following code, you'll need to have LaTeX installed on your system with the TikZ package. You can include this code in your LaTeX document:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!20] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!20] (1.5,1) .. controls (2.5,1.5) and (3,2) .. (3,2.5)
    .. controls (3,2) and (2.5,1.5) .. (2,1.5)
    .. controls (2,1.5) and (1.5,1.5) .. (1.5,1);
  
  % Legs of the unicorn
  \draw [fill=gray!20] (0.5,-1) rectangle (0.7,-2);
  \draw [fill=gray!20] (-0.5,-1) rectangle (-0.7,-2);
  \draw [fill=gray!20] (1.3,-1) rectangle (1.5,-2);
  \draw [fill=gray!20] (-1.3,-1) rectangle (-1.5,-2);
  
  % Tail of the unicorn
  \draw [fill=gray!20] (-1.8,0) .. controls (-2.5,0.5) and (-2.5,-0.5) .. cycle;
  
  % Horn of the unicorn
  \draw [fill=yellow!70] (2.8,2.5) -- (3.2,3.5) -- (2.4,3.5) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (2.5,2) circle [radius=0.05];
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1.5) .. controls (1,2) and (1.5,2.5) .. (1.5,3)
    .. controls (1.5,2.5) and (2,2) .. (2,1.5);
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The body, head, legs, tail, horn, eye, and mane are all created with basic shapes and curves. You can adjust the control points and shapes to refine the unicorn's appearance to your liking.

Remember that drawing complex figures like a unicorn can be quite challenging with TikZ, and it might be easier to use a vector graphic software for detailed illustrations and then include the resulting image in your LaTeX document.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details involved in such an illustration. TikZ is a powerful tool for creating vector graphics in LaTeX, but it's typically used for diagrams, graphs, and simple shapes. Drawing a unicorn would require a series of commands to create the outline and details of the unicorn.

Below is a simple example of how you might start creating a stylized unicorn in TikZ. This will not be a detailed or realistic unicorn, but rather a very simplified representation. For a more detailed drawing, you would need to use many more paths and possibly even incorporate an external image or use a more advanced drawing program.

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
    % Body of the unicorn
    \draw (0,0) ellipse (1.5 and 1);
    
    % Head of the unicorn
    \draw (1.5,0.5) arc (60:-30:1);
    
    % Rear leg
    \draw (-1,-1) -- (-1.2,-2);
    \draw (-1.2,-2) -- (-0.8,-2);
    
    % Front leg
    \draw (1,-1) -- (1.2,-2);
    \draw (1.2,-2) -- (0.8,-2);
    
    % Tail
    \draw (-1.5,0.5) .. controls (-2.5,1) and (-2.5,-1) .. (-1.5,-0.5);
    
    % Horn
    \draw (2,1) -- (2.5,2);
    
    % Eye
    \fill (2,0.8) circle (0.05);
    
    % Mane
    \draw (1.5,0.5) .. controls (1.2,1) and (1,1) .. (0.8,0.5);
    \draw (1.3,0.6) .. controls (1.1,1.1) and (0.9,1.1) .. (0.7,0.6);
    \draw (1.1,0.7) .. controls (0.9,1.2) and (0.7,1.2) .. (0.5,0.7);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. To compile this code, you need to have LaTeX installed with the TikZ package. You can compile it using a LaTeX editor or an online LaTeX editor like Overleaf.

For a more detailed and realistic unicorn, you would need to either draw it by hand and then trace it in TikZ (which would be very time-consuming) or use a vector graphic software like Adobe Illustrator or Inkscape and then export the image to be included in your LaTeX document.

Creating a drawing of a unicorn in TikZ can be quite complex due to the intricate details involved in such an illustration. TikZ is a powerful tool for creating vector graphics in LaTeX, but it's typically used for diagrams, graphs, and simple shapes. Drawing a detailed figure like a unicorn would require a lot of manual coding and an understanding of vector graphics design.

However, I can provide you with a simple example of how you might start creating a stylized unicorn using basic shapes in TikZ. This will not be a detailed drawing, but it will give you an idea of how you could begin such a project.

Here's a basic example of a unicorn created with simple shapes in TikZ:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
    % Body of the unicorn
    \draw[fill=gray!30] (2,1) ellipse (1.5 and 1);
    
    % Head of the unicorn
    \draw[fill=gray!30] (3.5,2) circle (0.5);
    
    % Ear of the unicorn
    \draw[fill=gray!30] (3.7,2.5) -- (3.9,2.7) -- (3.7,2.7) -- cycle;
    
    % Horn of the unicorn
    \draw[fill=yellow!30] (3.7,2.8) -- (3.9,3.2) -- (3.5,2.8) -- cycle;
    
    % Eye of the unicorn
    \draw[fill=black] (3.3,2.1) circle (0.05);
    
    % Legs of the unicorn
    \draw[fill=gray!30] (1.5,0.5) rectangle (1.7,1);
    \draw[fill=gray!30] (2.3,0.5) rectangle (2.5,1);
    \draw[fill=gray!30] (1.5,-0.5) rectangle (1.7,0);
    \draw[fill=gray!30] (2.3,-0.5) rectangle (2.5,0);
    
    % Tail of the unicorn
    \draw[fill=gray!30] (0.5,1.2) .. controls (0.2,1.5) and (0.2,0.5) .. (0.5,0.8);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. To create a more detailed and realistic unicorn, you would need to use more complex paths, curves, and possibly incorporate a pre-made SVG of a unicorn into your LaTeX document using the `svg` package or trace an image manually using TikZ commands.

For a detailed and realistic drawing, it's often more practical to create the image in a vector graphics editor, save it as an SVG file, and then include it in your LaTeX document. If you're set on using TikZ, you might want to look for existing TikZ drawings of unicorns or similar creatures that you can modify for your purposes.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is better suited for diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your computer with the TikZ package. You can then use the following LaTeX code to create a basic representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!30] (2,1) arc (0:180:0.5 and 0.25) -- (1,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!30] (0.3,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (1,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (-0.3,-1) rectangle +(0.3,-0.7);
  \draw [fill=gray!30] (-1,-1) rectangle +(0.3,-0.7);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (-1.8,-0.5) -- (-2.5,-0.7) -- (-1.8,-0.9) -- cycle;
  
  % Eye of the unicorn
  \draw [fill=black] (1.8,1.2) circle (0.05);
  
  % Horn of the unicorn
  \draw [fill=yellow!50] (1.5,1.5) -- (1.8,2.2) -- (1.2,1.5) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1.3) .. controls (1.6,1.8) and (1.1,1.8) .. (1.2,1.3);
  \draw [fill=pink] (1.3,1.2) .. controls (1.4,1.7) and (0.9,1.7) .. (1,1.2);
  \draw [fill=pink] (1.1,1.1) .. controls (1.2,1.6) and (0.7,1.6) .. (0.8,1.1);
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. The body, head, legs, tail, eye, horn, and mane are all created using basic shapes like ellipses, rectangles, and paths. You can compile this LaTeX code using a LaTeX editor or an online LaTeX editor like Overleaf.

For a more detailed and realistic unicorn, you would need to use more complex paths and possibly incorporate an external image or use a more advanced drawing tool. TikZ is not the most efficient tool for creating detailed illustrations, but it's great for diagrams and geometric shapes.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is more suited for diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have a LaTeX environment set up with the TikZ package installed. Here's a basic example of a unicorn drawing using TikZ:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw [fill=gray!30] (0,0) ellipse [x radius=2cm, y radius=1cm];
  
  % Head of the unicorn
  \draw [fill=gray!30] (2,0.5) arc (0:180:0.5 and 0.25) -- (1.5,1.5) -- cycle;
  
  % Legs of the unicorn
  \draw [fill=gray!30] (0.5,-1) rectangle (0.7,-1.5);
  \draw [fill=gray!30] (1.3,-1) rectangle (1.5,-1.5);
  \draw [fill=gray!30] (-0.5,-1) rectangle (-0.7,-1.5);
  \draw [fill=gray!30] (-1.3,-1) rectangle (-1.5,-1.5);
  
  % Tail of the unicorn
  \draw [fill=gray!30] (-2,-0.5) .. controls (-2.5,-0.2) and (-2.5,-0.8) .. (-2,-1);
  
  % Eye of the unicorn
  \draw [fill=black] (1.8,0.8) circle (0.05);
  
  % Horn of the unicorn
  \draw [fill=yellow!80] (1.5,1.5) -- (1.8,2.2) -- (1.2,2.2) -- cycle;
  
  % Mane of the unicorn
  \draw [fill=pink] (1.5,1) .. controls (1.7,1.2) and (2,1.1) .. (2,1.5)
        .. controls (2,1.1) and (2.3,1.2) .. (2.5,1)
        .. controls (2.3,0.8) and (2,0.9) .. (2,0.5)
        .. controls (2,0.9) and (1.7,0.8) .. (1.5,1);
\end{tikzpicture}
\end{document}
```

This code will produce a very simple and abstract representation of a unicorn. It uses basic shapes like ellipses, rectangles, and paths to create the body, head, legs, tail, eye, horn, and mane of the unicorn. You can adjust the colors, shapes, and positions to refine the drawing to your liking.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is typically used for creating diagrams, graphs, and simple shapes rather than detailed illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your computer with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
  % Body of the unicorn
  \draw[fill=gray!30] (0,0) ellipse (2 and 1);
  
  % Head of the unicorn
  \draw[fill=gray!30] (2,1) arc (90:-30:0.5 and 1) -- (2.5,0.5) -- cycle;
  
  % Legs of the unicorn
  \draw[fill=gray!30] (-1,-1) rectangle (-0.5,-2);
  \draw[fill=gray!30] (0.5,-1) rectangle (1,-2);
  
  % Tail of the unicorn
  \draw[fill=gray!30] (-2,-0.5) .. controls (-3,-0.5) and (-3,-1) .. (-2,-1) -- cycle;
  
  % Eye of the unicorn
  \draw[fill=black] (2.5,0.75) circle (0.05);
  
  % Horn of the unicorn
  \draw[fill=yellow!50] (2.5,1.5) -- (3,2.5) -- (2.7,1.5) -- cycle;
  
  % Mane of the unicorn
  \draw[fill=pink] (1.5,1) .. controls (1,1.5) and (0.5,1.5) .. (0,1) .. controls (0.5,1.3) and (1,1.3) .. (1.5,1);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. It uses ellipses for the body, rectangles for the legs, and custom paths for the head, tail, mane, and horn. The colors and shapes are quite simple, and you can adjust them to make the unicorn look more like how you envision it.

To compile this LaTeX code, you can use an online LaTeX editor like Overleaf, or you can install a LaTeX distribution like TeX Live or MiKTeX on your computer and compile it using a tool like pdflatex.

Remember, this is a very basic representation. Creating a more detailed and realistic unicorn would require more advanced TikZ skills and a lot of patience, as you would need to define many more custom paths and shapes to capture the details of the unicorn's features.

Creating a detailed drawing of a unicorn using TikZ in LaTeX can be quite complex, as TikZ is more suited for creating diagrams and simple shapes rather than intricate illustrations. However, I can provide you with a simple example of how to draw a stylized unicorn using basic shapes and paths in TikZ.

To draw a unicorn, you'll need to have LaTeX installed on your system with the TikZ package. You can then use the following LaTeX code to create a simple representation of a unicorn:

```latex
\documentclass[tikz,border=10pt]{standalone}
\usepackage{tikz}

\begin{document}
\begin{tikzpicture}
    % Body of the unicorn
    \draw [fill=gray!30] (0,0) ellipse [x radius=2cm, y radius=1cm];
    
    % Head of the unicorn
    \draw [fill=gray!30] (2,1) arc (0:180:0.5 and 0.25) -- (1,1) -- cycle;
    
    % Legs of the unicorn
    \draw [fill=gray!30] (-1,-1) rectangle (-0.5,-2);
    \draw [fill=gray!30] (0.5,-1) rectangle (1,-2);
    
    % Tail of the unicorn
    \draw [fill=gray!30] (-2,-0.5) -- (-3,-0.75) -- (-2,-1) -- cycle;
    
    % Mane of the unicorn
    \draw [fill=gray!30] (1.5,1.25) -- (1,2) -- (1.5,2.5) -- (2,2) -- cycle;
    
    % Horn of the unicorn
    \draw [fill=yellow!50] (1.75,1.75) -- (2.25,3) -- (2.5,1.75) -- cycle;
    
    % Eye of the unicorn
    \draw [fill=black] (1.75,1.25) circle [radius=0.05];
    
    % Smile of the unicorn (optional)
    \draw (1.5,1) arc (0:-30:0.5);
\end{tikzpicture}
\end{document}
```

This code will produce a very basic and abstract representation of a unicorn. It uses ellipses for the body, rectangles for the legs, and triangles for the horn, mane, and tail. The eye is a small circle, and there's an optional smile arc.

To create a more detailed and realistic unicorn, you would need to use more complex paths and possibly incorporate Bezier curves, which would require a lot of fine-tuning and artistic skill with TikZ.

Remember to compile this code with a LaTeX editor that supports TikZ, such as Overleaf or a local LaTeX installation with the TikZ package installed.